Parker Denison M4C-075-3N03-A102-M70289 Hydraulic Motor – 014-70289-0

Order No. 014-70289-0 identifies this Parker Denison hydraulic motor in the M4C Series; the source model code is M4C-075-3N03-A102-M70289.

Parker Denison Hydraulic Motors M4C Series
BrandParker Denison
Order No014-70289-0
ModelM4C-075-3N03-A102-M70289
Product NameParker Denison M4C-075-3N03-A102-M70289 Hydraulic Motor – 014-70289-0
Product TypeHydraulic Motor
Alternate Model / Model 1M4C 075 3N03 A102 M70289
SeriesM4C Series
Availability / Lead Time

Product Details

Product Overview

  • Model M4C-075-3N03-A102-M70289 appears under more than one record in the M4c Series. Use 014-70289-0 to distinguish this product entry.
  • Alternate code M4C 075 3N03 A102 M70289 is shown as an additional identification reference. It does not by itself confirm interchangeability.

Back to M4C Series

Product Identification

BrandParker Denison
SeriesM4C Series
Order No014-70289-0
ModelM4C-075-3N03-A102-M70289
Alternate modelsM4C 075 3N03 A102 M70289
Also searched asM4C 075 3N03 A102 M70289 / 014-70289-0 / 014702890 / M4C-075-3N03-A102-M70289

Product Classification

Product typeHydraulic Motor
Documented displacement80.1 cm3/rev

Series-specific model code

Original model: M4C-075-3N03-A102-M70289

Code coverage: Evidence-supported meanings shown. Confirmation required for remaining configuration.

Evidence profile: M4C field-level ordering-code profile (manual-evidence revision 6)

Code segmentEvidence-bound meaning
M4C Series: M4C.
075 Documented displacement: 80.1 cm3/rev.
3 Shaft: Splined shaft (SAE B).
N Direction of rotation: bi-directional.
03 Porting-combination code: 03. Contact us to confirm.
A Design level: A.
1 Seal: S1 BUNA-N seal class.
02 Ports: Four-bolt SAE flange with UNC threads and SAE drain.
M70289 Modification or special reference: M70289. Contact us to confirm.

Each supplied shaft, direction, porting, design, seal, port and modification field remains separate. Catalog-backed values are decoded; unknown or historical selections remain unchanged and say Contact us to confirm.

Availability

Inquiry Only.

FAQ

Product FAQ

Is this the right record for my order number?

Use this record when the Order No or model code matches your nameplate. Send photos if the code is incomplete or written differently.

Can an alternate model code be used?

Yes, but the quote should still be checked against the primary order number and nameplate photo.

What should I send for quote review?

Send the complete order number, complete model code, nameplate photo when available, and required quantity.