Parker Denison M5AF-018-1R02-B1W-00000M70732 Hydraulic Motor – 014-70732-002

Order No. 014-70732-002 identifies this Parker Denison hydraulic motor in the M5A Series; the source model code is M5AF-018-1R02-B1W-00000M70732.

Parker Denison Hydraulic Motors M5A Series
BrandParker Denison
Order No014-70732-002
ModelM5AF-018-1R02-B1W-00000M70732
Product NameParker Denison M5AF-018-1R02-B1W-00000M70732 Hydraulic Motor – 014-70732-002
Product TypeHydraulic Motor
Alternate Model / Model 1M5AF 018 1R02 B1W 00000M70732
SeriesM5A Series
Availability / Lead Time

Product Details

Product Overview

  • Model M5AF-018-1R02-B1W-00000M70732 appears under more than one record in the M5a Series. Use 014-70732-002 to distinguish this product entry.
  • Alternate code M5AF 018 1R02 B1W 00000M70732 is shown as an additional identification reference. It does not by itself confirm interchangeability.

Back to M5A Series

Product Identification

BrandParker Denison
SeriesM5A Series
Order No014-70732-002
ModelM5AF-018-1R02-B1W-00000M70732
Alternate modelsM5AF 018 1R02 B1W 00000M70732
Also searched asM5AF 018 1R02 B1W 00000M70732 / 014-70732-002 / 01470732002 / M5AF-018-1R02-B1W-00000M70732

Product Classification

Product typeHydraulic Motor
Documented displacement18.0 cm3/rev

Series-specific model code

Original model: M5AF-018-1R02-B1W-00000M70732

Code coverage: Evidence-supported meanings shown. Confirmation required for remaining configuration.

Evidence profile: M5AF field-level ordering-code profile (manual-evidence revision 6)

Code segmentEvidence-bound meaning
M5AF Series: M5AF.
018 Documented displacement: 18.0 cm3/rev.
1 Shaft: Taper shaft, non-SAE.
R Direction of rotation: Clockwise.
02 End-cap type: side ports.
B Design code: B (manufacturer design identifier).
1 Seal: S1 BUNA-N seal class.
W Connection: UNF threaded work ports and drain.
0 Modification selection: 0. Contact us to confirm.
0 Option: No option.
0 Pressure-valve type: Without pressure valve.
00 Pressure setting: Motor without pressure valve.
M70732 Embedded special reference: M70732. Contact us to confirm.

The parser follows the family-specific M5 ordering page. Each supplied shaft, rotation, end-cap, design, seal, connection, option, valve, pressure and special-reference field remains separate; unknown selections say Contact us to confirm.

Availability

Inquiry Only.

FAQ

Product FAQ

Is this the right record for my order number?

Use this record when the Order No or model code matches your nameplate. Send photos if the code is incomplete or written differently.

Can an alternate model code be used?

Yes, but the quote should still be checked against the primary order number and nameplate photo.

What should I send for quote review?

Send the complete order number, complete model code, nameplate photo when available, and required quantity.